Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!pasteur!ames!oliveb!apple!amdahl!kevin
From: kevin@uts.amdahl.com (Kevin Clague)
Newsgroups: comp.sys.amiga
Subject: Re: 2000HD questions!!
Message-ID: <12MyZc73XB1010C9jHg@amdahl.uts.amdahl.com>
Date: 30 Mar 89 20:09:17 GMT
References: <11838@louie.udel.EDU> <4398@enea.se>
Reply-To: kevin@amdahl.uts.amdahl.com (Kevin Clague)
Organization: Amdahl Corporation,  Sunnyvale, CA 94086
Lines: 22

In article <4398@enea.se> tope@enea.se (Tommy Petersson) writes:
>In article <11838@louie.udel.EDU> jwhitman@st-louis-emh2.army.mil (Jerry Whitman) writes:
>>1.  I cannot seem to get Prefs to switch to interlaced WB.  I select Prefs
>
>What You described will save the new System-Configuration in the devs:
>directory on the hard disk. Unfortunately, the System-Configuration on
>the boot volume (df0:) is used. Fortunately, there is a program on the
>WB disk (at least WB 1.3) called CopyPrefs, which copies System-Config
>from devs: to df0:devs. You then have to eboot the machine.
>
>The USE option in Preferences doesn't work for all items.

and after copying preferences, you must reboot for them to take effect.
Kevin
-- 
UUCP:  kevin@uts.amdahl.com
  or:  {sun,decwrl,hplabs,pyramid,seismo,oliveb}!amdahl!kevin
DDD:   408-737-5481
USPS:  Amdahl Corp.  M/S 249,  1250 E. Arques Av,  Sunnyvale, CA 94086

[  Any thoughts or opinions which may or may not have been expressed  ]
[  herein are my own.  They are not necessarily those of my employer. ]