Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!amdahl!dwl10
From: dwl10@uts.amdahl.com (Dave Lowrey)
Newsgroups: comp.sys.amiga
Subject: Re: one disk drive
Message-ID: <139U2a7SBu1010jO92k@amdahl.uts.amdahl.com>
Date: 1 Apr 89 13:33:46 GMT
References: <4755@charon.unm.edu>
Reply-To: dwl10@amdahl.uts.amdahl.com (Dave Lowrey)
Distribution: usa
Organization: Amdahl Corporation, Houston TX
Lines: 25

In article <4755@charon.unm.edu> hansb@ariel.unm.edu (The Amiga Programmer) writes:
>I have a friend that has had a problem with his amiga 2000 machine.
>His 2nd drive (internal df1:) gave up, and now he needs to set the 
>jumpers correctly on the motherboard.  When he removed the jumper 
>J301, the machine could not read df0: again.  Is there another 
>jumper that needs to be changed, or any other info I could tell
>him?
>
Make sure he has hooked up the correct ribbon cable connector to his
drive. The connector on the END of the cable goes to df0:. The one in the
middle goes to DF1:.

-- 
-------------------------------------------------------------------

    "This isn't Heaven, this is Cleveland!!!!"

                          Dave Lowrey
                          Amdahl Corp.
                          Houston, Texas
                          (713)-850-8828
                         ...!{ames,sun,decwrl,uunet,....}!amdahl!dwl10

[ The opinions expressed <may> be those of the author and not necessarily
  those of his most eminent employer. ]