Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uflorida!haven!uvaarpa!mcnc!rti!sas!walker
From: walker@sas.UUCP (Doug Walker)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Flicker Fixer question
Message-ID: <983@sas.UUCP>
Date: 23 Mar 89 20:13:25 GMT
References: <1856@mentor.cc.purdue.edu>
Reply-To: walker@sas.UUCP (Doug Walker)
Organization: SAS Institute Inc, Cary NC
Lines: 14

In article <1856@mentor.cc.purdue.edu> aru@mentor.cc.purdue.edu (Sriram Ramkrishna) writes:
>I hope this is the right place to post this.  Well here goes.  Can the
>flicker fixer be used with a VGA monitor.  
Yes.  However, a VGA monitor can't be used with the 'normal' output of thte
Amiga, so you would be REQUIRED to use the fF from then on.  A multisync
could display either the fF output OR straight Amiga RGB.  Not a big
deal to most people, but it is a difference.

> Also which would be more
>economical buying a flicker fixer or just buying either a multisync or an
>Amiga monitor.
Buying just the multisync or Amiga monitor doesn't deinterlace the display,
that is, you still get the flicker that flickerFixer fixes.  But it's
certainly cheaper.