Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!bloom-beacon!apple!amdahl!lfk
From: lfk@uts.amdahl.com (Lynn Kerby)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Why won't VT100 2.8 compile???
Keywords: vt100
Message-ID: <11G0Ye8rZ=10101gm52@amdahl.uts.amdahl.com>
Date: 29 Mar 89 01:33:07 GMT
References: <424a49e8.1285f@maize.engin.umich.edu>
Reply-To: lfk@tde.uts.amdahl.com (Lynn Kerby)
Distribution: na
Organization: Amdahl Corporation, Sunnyvale, CA
Lines: 30

In article <424a49e8.1285f@maize.engin.umich.edu> beh@caen.engin.umich.edu (Bob Hruska) writes:
 >
 >I've got Manx 3.6a and I'm trying to compile the source to vt100 2.8,
 >but it chokes every time on vt100.c and init.c with the following error:
 >
 >init.c:24: ERROR 49: multiply defined symbol: ConsoleDevice
 >
 >(the same for vt100.c)
 >
[other stuff deleted] 
 >Bob Hruska   University of Michigan Computer Aided Engineering Network (CAEN)
 >
 >INTERNET: beh@caen.engin.umich.edu
 >    UUCP: {umix|ucbvax|uunet}!caen.engin.umich.edu!beh

The problem appears to be a bad definition in the MANX 3.6 functions.h file.
I went through all the RKM stuff and the Autodocs and cannot find a function
called ConsoleDevice.  I just commented out that line in functions.h and 
everything worked fine.

-- 
     Lynn Kerby  -  Amdahl Corporation
                    Sunnyvale, CA
                    ...amdahl!lfk
		    lfk@uts.amdahl.com

Disclaimer: Any and all opinions expressed herein are my own and do not
            necessarily represent the views of anyone, especially my
            employer.