Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!ucsd!sdcsvax!ucsdhub!hp-sdd!ncr-sd!bti!scobb
From: scobb@bti.UUCP (Steve Cobb)
Newsgroups: comp.sys.amiga.tech
Subject: CGA output from an Amiga (blasphemous, I know)
Keywords: video output
Message-ID: <391@bti.UUCP>
Date: 29 Mar 89 19:23:43 GMT
Organization: Biomagnetic Technologies, inc., San Diego, CA
Lines: 22


	Does anybody have information on how to get CGA output out of 
    the Amiga video connector.  No, I'm not sick, twisted and ...
    There is a new LCD projection system (like a NOVA beam system)
    but quite small.  Anyway, it accepts both NTSC and CGA input.
    For our needs (visual stimulus system) pixel definition is
    more important than colors/bitmap size.  So it seems that
    CGA input may be the way to go.  NTSC might wash out too much.

	Given that the video connector has TTL outputs, it seems
    that CGA output should not be a problem.  If this indeed works,
    (correct scanning freq ...) can anyone out there give me a pin out
    or connection diagram to do this?

	Thanks in advance,
		Steve Cobb

	Biomagnetic Technologies, inc.
MAIL:   4174 Sorrento Valley Blvd. San Diego, CA 92121  ----------------------
PHONE:  (619) 453-6300 x349                             | Disclaim all words |
UUCP:   {ucsd, hplabs!hp-sdd}!ncr-sd!bti!scobb          |  Ye who read here  |
                                                        ----------------------