Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!leah!itsgw!steinmetz!crdgw1!uunet!sco!brianm
From: brianm@sco.COM (Brian Moffet)
Newsgroups: comp.sys.amiga.tech
Subject: Serial Line Control Register
Keywords: Where is it?
Message-ID: <2160@viscous.sco.COM>
Date: 30 Mar 89 18:43:52 GMT
Reply-To: brianm@sco.COM (Brian Moffet)
Organization: The Santa Cruz Operation, Inc.
Lines: 20


On the AT type machines, there are a couple of ports
which are used to set or read the line control status.
These are used to set RTS and DTR, or to read DTS, CTS, etc...

I cannot find these ports (or their equivalant) in the old
Hardware manual.  Is this info available in the new ones?
I haven't got mine yet...

I just want to know where to look at the hardware level to see
if CTS or CD is set...

thanks

brian moffet

-- 
'Evil Geniuses for a Better Tommorrow!'
My opinions do not in any way reflect those of my employer or my fish.
Brian Moffet	brianm@sco.com  {ucscc,uunet,decvax!microsof}!sco!brianm