Path: utzoo!attcan!uunet!husc6!ukma!rutgers!apple!mattd From: mattd@Apple.COM (Matt Deatherage) Newsgroups: comp.sys.apple Subject: Re: interrupts Message-ID: <28210@apple.Apple.COM> Date: 1 Apr 89 09:01:36 GMT References: <8903311907.AA05671@wpi> Organization: Apple Computer Inc, Cupertino, CA Lines: 33 In article <8903311907.AA05671@wpi> GREYELF@WPI.BITNET writes: >Can anyone tell me if a Pascal standard protocal has been established >for use of interrupts from a clock card? For recognition of a clock >card? I'm thinking of adding the ability to recognize clock cards >to Daemon, since not everyone has a mouse card. Most clock cards don't follow a Pascal 1.1 protocol for their firmware. Why? Well, ProDOS 8 had a ThunderClock driver, and looked for non-Pascal ID bytes. Combining those (listed in the P8 Manual) with the Pascal ID bytes would have made for some pretty weird code (remember, this starts at $Cn00 and is usually executed by BASIC programs to read the clock). >In addition any information on the Pascal standard protocals for >recognition and access to devices would be appreciated. I have this information in a book, but it's at work and I'm at home. If no one has posted this within a day or two (like by Monday), please ask again and I'll post it (since I'll be at work then, hopefully). >-- >Michael J Pender Jr Box 1942 c/o W.P.I. I wrote SHELL and Daemon, >greyelf@wpi.bitnet 100 Institute Rd. send bug reports, suggestions, >greyelf@wpi.wpi.com Worcester, Ma 01609 checks to me. ----------------------------------------------------------------------------- Matt Deatherage, Apple Computer, Inc. | "The opinions expressed in this tome Send PERSONAL mail ONLY (please) to: | should not be construed to imply that AppleLink PE: Matt DTS GEnie: AIIDTS | Apple Computer, Inc., or any of its CompuServe: 76703,3030 | subsidiaries, in whole or in part, Usenet: mattd@apple.com | have any opinion on any subject." UUCP: (other stuff)!ames!apple!mattd | "So there." -----------------------------------------------------------------------------