Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!unmvax!pprg.unm.edu!hc!lll-winken!uunet!hsi!stpstn!aad
From: aad@stpstn.UUCP (Anthony A. Datri)
Newsgroups: comp.sys.hp
Subject: Re: HP 9000/835 running X11 and HP-UX 3.01
Message-ID: <3098@stpstn.UUCP>
Date: 29 Mar 89 14:25:33 GMT
References: <17119@cisunx.UUCP>
Reply-To: aad@stepstone.com
Organization: The Stepstone Corporation, Sandy Hook, CT
Lines: 15

In article <17119@cisunx.UUCP> mike@cisunx.UUCP (Mike  Elliot) writes:

>This works fine on the HP 360, but if we set our DISPLAY to unix:0 this
>sometimes causes our programs on the 835 to hang. They run fine if we
>rlogin from another machine or if we set the DISPLAY to `hostname`:0. The

As I understand it, something about HP-UX makes unix-domain connections
(unix:0) not work.  If you look at MIT's util/imake.includes/hpux.macros,
you'll see that they only define tcp/ip connections (hostname:0).

-- 
@disclaimer(Any concepts or opinions above are entirely mine, not those of my
	    employer, my GIGI, my VT05, or my 11/34)
beak is@>beak is not
Anthony A. Datri @SysAdmin(Stepstone Corporation) aad@stepstone.com stpstn!aad