Xref: utzoo comp.sys.ibm.pc:26655 comp.sys.intel:778
Path: utzoo!attcan!lsuc!maccs!cs3b3aj
From: cs3b3aj@maccs.McMaster.CA (Stephen M. Dunn)
Newsgroups: comp.sys.ibm.pc,comp.sys.intel
Subject: Re: 80286 protected mode programming
Keywords: 80286 protected mode
Message-ID: <2244@maccs.McMaster.CA>
Date: 27 Mar 89 19:56:15 GMT
References: <86@necbsd.NEC.COM>
Reply-To: cs3b3aj@maccs.UUCP (Stephen M. Dunn)
Followup-To: comp.sys.ibm.pc
Distribution: na
Organization: McMaster U., Hamilton, Ont., Can.
Lines: 12

In BYTE's IBM-PC special issue, 1986 (I think it was 86), there's an article
about using the 286 in protected mode.  It includes a simple demo program.
I'm sure it would have references, too.  (The question is, is it still
available as a back issue?  :-)

Regards,

-- 
======================================================================
! Stephen M. Dunn, cs3b3aj@maccs.McMaster.CA ! DISCLAIMER:           !
! I always wanted to be a lumberjack! - M.P. ! I'm only an undergrad !
======================================================================