Xref: utzoo comp.sys.ibm.pc:26664 comp.sys.intel:779
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!apple!oliveb!intelca!mipos3!margulis
From: margulis@mipos3.intel.com (Neal Margulis)
Newsgroups: comp.sys.ibm.pc,comp.sys.intel
Subject: Re: 80286 protected mode programming
Keywords: 80286 protected mode
Message-ID: <3823@mipos3.intel.com>
Date: 28 Mar 89 01:49:06 GMT
References: <86@necbsd.NEC.COM> <1455@mtunb.ATT.COM>
Reply-To: margulis@mipos3.UUCP (Neal Margulis)
Organization: Intel, Santa Clara, CA
Lines: 11

The original posting does not specify what environment the code will be
developed in.

The reference that you cite provides a good reference,  and
assumes a non-DOS system.  An example that is written for the 
a DOS system can be found in "80386 Protected Mode Initialization" which
appeared in Dr. Dobbs Journal in October 1988.

Check the local library.  

Neal