Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!hplabs!hplabsz!taylor
From: taylor@hplabsz.HP.COM (Dave Taylor)
Newsgroups: comp.sys.mac.programmer
Subject: LSC prog for interacting with modem port?
Message-ID: <3150@hplabsz.HPL.HP.COM>
Date: 30 Mar 89 08:01:21 GMT
Sender: taylor@hplabsz.HPL.HP.COM
Reply-To: taylor@hplabs.HP.COM (Dave Taylor)
Organization: Intuitive Systems; guest of Hewlett-Packard Laboratories
Lines: 25

I recall a few weeks ago that someone asked for a program fragment that
would allow them to talk to the modem port on the Macintosh from within
Lightspeed C.  I don't, however, have access to the original request,
nor have I seen any responses.  I would like to receive from anyone who
may have access a simple program (prob. sans interface whizzies) to do
same.

What I'm planning on doing is hacking on a very simple-minded terminal 
emulator program as the basis for a program that could run on the Mac and 
in a reasonably intelligent manner interact with software running on remote
computers.

I plan on creating the interface using Prototyper 2.0 (an ultimately cool
program, in my opinion!) and would be delighted to get some skeleton C
code for LSC that I could stick into the prototype to quickly create
a hacked working prototype.

Thanks for any and all help you can offer!  All code used gratefully
acknowledged in About boxes ...

							-- Dave Taylor
Intuitive Systems
Los Altos, California

Guest of HP Laboratories:  taylor@hplabs.hp.com