Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!lll-winken!uunet!steinmetz!davidsen
From: davidsen@steinmetz.ge.com (Wm. E. Davidsen Jr)
Newsgroups: comp.unix.xenix
Subject: Re: UUCP performance
Message-ID: <13475@steinmetz.ge.com>
Date: 28 Mar 89 22:29:16 GMT
References: <601@marob.MASA.COM>
Reply-To: davidsen@crdos1.UUCP (bill davidsen)
Organization: General Electric CRD, Schenectady, NY
Lines: 18

In article <601@marob.MASA.COM> daveh@marob.masa.com (Dave Hammond) writes:

| What, if any, tuning can be done to increase our uucp performance?

  I had the same problem. I set windows to 7. The problem went away. You
will have to ask someone for a patch for v < 2.3.1, I have installed it
but lost the doc. 2.3.1 has the info in the manual somewhere. You diddle
something with adb from 3 to 7.

  Now MY question: why in hell doesn't SCO shep uucico set to w=7 by
default? Is there a prize for bad performance.

  I see over 200cps on a 2400 baud line, about 600 on 9600 (but the
other machine is an overloaded pig).
-- 
	bill davidsen		(wedu@crd.GE.COM)
  {uunet | philabs}!steinmetz!crdos1!davidsen
"Stupidity, like virtue, is its own reward" -me