Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!lll-winken!uunet!portal!cup.portal.com!Chip_N_Oliver From: Chip_N_Oliver@cup.portal.com Newsgroups: comp.unix.xenix Subject: How to restor a level 0 archive? Message-ID: <16436@cup.portal.com> Date: 30 Mar 89 06:22:28 GMT Distribution: na Organization: The Portal System (TM) Lines: 38 Many thanks for those who previously replied to my request for info on mounting this 2nd HD although it already had a root on it. Now I'm on to the next step which is to put a DOS (crowd grimaces) partition on one of the HD's. I did a level 0 backup of the disk but now can't get the #?$%& archive restored back on the HD. I'm attempting to restore a level 0 archive from a set of floppies while booted from a boot floppy (V2.2). I've tried various combinations after having done a "mkdev hd" and/or "divvy -b 1 -c 1 -i". Some people have recommended using /dev/hd00 for the output device, others have said to use hd0n (where n is the partition). The XENIX manual gives an example (in restor(C)) using /dev/hd1. In any case, I haven't been successful with any of them. I'm using the following command: restor rf /dev/fd196ds15 /dev/hdnn (boot floppy on fd0, archive on fd1) ( tried using nn = 00, 01 & 1) The result is that I receive disk read errors when I use /dev/hd00 and "disk full" messages when I use /dev/hd01. The "disk full" message is encountered several minutes into the read of the first floppy of a 12 floppy archive (apparently it allocates space for all the files while reading the dump file?). Before archiving, the file system only used approx. 60% of the total disk space so I don't understand the "disk full" message. I'd appreciate it if anyone can shed any light as to what the problem may be. Notes: I've tried using 2 different sets of archive floppies with the same results. I can not only do a successful dumpdir of the archive sets, but also can INDIVIDUALLY restore files from the archive set. Chip Oliver coliver@cup.portal.com Lockheed Missiles & Space sun!portal!cup.portal.com!coliver --- this space left internationally blank ---