Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!lll-winken!uunet!nuchat!texhrc!gmk
From: gmk@texhrc.UUCP (Gail Kahle)
Newsgroups: comp.windows.x
Subject: Re: Problems with Sun 4/110, OS 4.0
Summary: Problems with command buttons on Sun4
Keywords: problems,Sun 4/110, Sun OS 4.0
Message-ID: <307@texhrc.UUCP>
Date: 30 Mar 89 21:24:57 GMT
References: <463@hfserver.hfnet.bt.co.uk>
Organization: Texaco Houston Res. Cntr Hou, Tx
Lines: 29

In article <463@hfserver.hfnet.bt.co.uk>, davel@hfserver.hfnet.bt.co.uk (Dave Linton) writes:
> I'm having problems getting X11R3 to run on a Sun 4/110 (Sparc) under OS 4.0
> 
> I've modified Sun.macros for the OS version. Everything builds ok. 
> Problems encountered so far:
> 1. xedit crashes on startup with Segmentation fault.
> 2. xman starts up ok but crashes with Segmentation fault as soon as the cursor
>    is moved into any of the buttons.
> 
> The same distribution builds and works ok on a Sun 3/160 under OS 3.5.
> 

I am running X11R3 on both a Sun3 and a Sun4, and have experienced the 
same problem with a segmentation fault when the cursor enters a command
button on the Sun4 only.  However, this occurs on all of the demos and
contrib examples, which leads me to believe I'm missing some part of 
the installation defaults.

I can get around it by adding a call to XtSetArg(arg[n],XtNtranslations,
XtParseTranslationTable) and setting <Enter Window>, etc. for each
command button used, but since the original code works OK on the Sun3,
there must be another way.

Any ideas ?  Thanks.

				Gail Kahle
				Texaco, Inc.
				Exploration & Production Technology
				Houston, Tx.