Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!unmvax!polyslo!ddurbin
From: ddurbin@polyslo.CalPoly.EDU (Daniel A. Durbin)
Newsgroups: comp.binaries.ibm.pc.d
Subject: Re: digitize.arc
Summary: I'll upload it to Simtel20
Keywords: digitize, voice
Message-ID: <10049@polyslo.CalPoly.EDU>
Date: 8 Apr 89 03:11:35 GMT
References: <1813@csd4.milw.wisc.edu> <9943@polyslo.CalPoly.EDU> <7935@boulder.Colorado.EDU> <12602@louie.udel.EDU>
Reply-To: ddurbin@polyslo.CalPoly.EDU (Daniel A. Durbin)
Distribution: usa
Organization: Cal Poly State University -- San Luis Obispo
Lines: 24

In article <12602@louie.udel.EDU> davis@udel.EDU (Michael Davis) writes:
>The archive for digitize that I got had a batch file to print the schematic
>on a HP but the .prn file wasn't included.  I don't have a Epson compatible
>printer available. Does anyone have this HP file or better yet, can someone
>provide a PostScript version of the schematic?
>
>Thanks
>Mike

	The batch file is as follows:

rem      This file will print out properly only on an HP Laserjet Plus
rem      or its equivalent. If your printer is attached to something
rem      other than LPT1:, then modify the COPY command as appropriate.
pause
copy /b schematc.prt lpt1:

	The schematc.prt file is 166 Kbytes long so I'll upload it to
	simtel and as Keith to include it into the DIGITIZE archive.

	Daniel Durbin___________________________________________________
	SysOp: Cygnus X-1 BBS		| CIS: 73447,1744
	(805) 541-8505 (data)		| GEnie: D.DURBIN
	EL major at PolySlo		| ddurbin@polyslo.CalPoly.EDU