Xref: utzoo comp.dcom.lans:2645 comp.sys.ibm.pc:27112 Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uflorida!gatech!mcnc!ecsvax!uncmed!uncmed.med.unc.edu!goldston From: goldston@uncmed.med.unc.edu Newsgroups: comp.dcom.lans,comp.sys.ibm.pc Subject: Using Print Screen with 3Com LANs Message-ID: <420@uncmed.med.unc.edu> Date: 6 Apr 89 20:17:23 GMT Sender: news@uncmed.med.unc.edu Reply-To: goldston@uncmed.med.unc.edu () Distribution: na Organization: UNC-CH School of Medicine Lines: 14 I am trying to print a screen to a printer attached to LPT1:. The pc is an IBM PS/2 Model 50 with an Etherlink/MC card installed. If I boot up with the 3Com network drivers installed, pressing doesn't cause the current screen to be printed out. I have tried using the com- bination suggested in the 3Com user's guide, but this doesn't work either. I am currently using version 1.2.1 of 3+Share for the network OS. If any- one has dealt with this problem and found a solution, please e-mail it to goldston@med.unc.edu. Thanks very much. ============================================================================== David F. Goldston Disclaimer: All opinions expressed in usenet:goldston@uncmed the above posting are my own. internet:goldston@med.unc.edu Phone:(919)966-1325