Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!shadooby!accuvax.nwu.edu!tank!ncar!ames!killer!rpp386!jfh
From: jfh@rpp386.Dallas.TX.US (John F. Haugh II)
Newsgroups: comp.sources.wanted
Subject: Re: Seeking source code to UNIX 'cut' command
Summary: It's in the archives ...
Message-ID: <14847@rpp386.Dallas.TX.US>
Date: 6 Apr 89 12:08:55 GMT
References: <42749c99.c1c7@mezz.engin.umich.edu>
Reply-To: jfh@rpp386.Dallas.TX.US (John F. Haugh II)
Organization: River Parishes Programming, Dallas TX
Lines: 13

In article <42749c99.c1c7@mezz.engin.umich.edu> stealth@caen.engin.umich.edu (Mike Peltier) writes:
>I am trying to get a shell script conferencing system
>running on the Apollos here at the University, and I
>found out right away that there is no 'cut' command
>available.

There are archives out there.  ANY good archive site
should have the cut and paste package which was posted.
-- 
John F. Haugh II                        +-Quote of the Week:-------------------
VoiceNet: (214) 250-3311   Data: -6272  | "Porsche does not recommend
InterNet: jfh@rpp386.Dallas.TX.US       |  exceeding any speed limits"
UucpNet : <backbone>!killer!rpp386!jfh  +--        -- Porsche Ad   ------------