Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!mcvax!prlb2!lln-cs!sunbim!syteke!jim
From: jim@syteke.UUCP (Jim Sanchez)
Newsgroups: comp.sys.amiga
Subject: Request for help on Monitor
Message-ID: <206@syteke.UUCP>
Date: 12 Apr 89 09:08:36 GMT
Reply-To: jim@syteke.UUCP (Jim Sanchez)
Organization: Sytek, Inc. - European Support Office
Lines: 19


I came home last evening and when I turned my amiga monitor on,
nothing happened.  After taking it apart I found that the power supply
fuse had blown rather violently.  I suspect that after about 3.5
years, the flyback transformer has given up.  I would obviously like
to replace the monitor but my situation is a little more difficult
since I while I live in Europe, my old 1000 is a US version.  This
makes the purchase of another Commodore monitor inappropriate.  I wish
to purchase a multi-sync monitor since I have concluded that I can use
it with my NTSC system or a PAL system if I purchase one later.   The
questions are: (1) is my conclusion correct (2) reccomendations for
montors that can be bought in europe (3) places within driving
distance of Brussels where I can purchase both monitor and cable at
reasonable(for europe) prices.

As always, thanks for any/all help.
-- 
Jim Sanchez  {sun,hplabs}!sun!sytek!syteke!jim OR
Sytek Brussels  mcvax!prlb2!sunbim!syteke!jim