Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ulowell!cbmvax!bryce
From: bryce@cbmvax.UUCP (Bryce Nesbitt)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Serial Device
Message-ID: <6503@cbmvax.UUCP>
Date: 5 Apr 89 04:44:46 GMT
References: <125574@neabbs.UUCP>
Reply-To: bryce@cbmvax.UUCP (Bryce Nesbitt)
Organization: Commodore Technology, West Chester, PA
Lines: 19

In article <125574@neabbs.UUCP> rjhlric@neabbs.UUCP (RICHARD SCHIFFELERS) writes:
|1. Can anyone tell me if it's possible to set a baudrate outside
|   the normal range (110,300 etc.) and so yes, how.

Yes.  Set a different number in your SETPARAMS Iorequest.  You cannot make
the selection from the preferences program. 

|2. What is the lowest possible baudrate of the serial device.
|   ( I would like to use the Amiga for RTTY decoding, and 
|     for this i need 50 and 75 baud ).

The hardware low-end is about 108 baud 

-- 
|\_/|  . ACK!, NAK!, EOT!, SOH!
{O o} .     Bryce Nesbitt, Commodore-Amiga, Inc.
 (")        BIX: bnesbitt
  U	    USENET: cbmvax!bryce@uunet.uu.NET -or- rutgers!cbmvax!bryce
Lawyers: America's untapped export market.