Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!lll-winken!uunet!mcvax!ukc!strath-cs!glasgow!icdoc!syma!benw
From: benw@syma.sussex.ac.uk (Ben Whitaker)
Newsgroups: comp.sys.atari.st
Subject: help with internal compiler error in MWC
Keywords: MWC, internal compiler error, op=61
Message-ID: <886@syma.sussex.ac.uk>
Date: 13 Apr 89 13:53:32 GMT
Organization: University of Sussex
Lines: 39

i am using MWC (v3.0) on an atari 1040 with two double sided drives. 
when compiling the following, with the source on a 512k RAM disc 
(of which some 300k is free) which also holds \tmp, i get the following 
message:

In cc1: Internal compiler error::no match,op=61

code follows:

void foo(fx)
float (*fx)();
{
	float fc,x=1.0;
	fc=(*fx)(x);
}

my manual says "this shouldn't happen". does anyone have any ideas why cc1.prg
gets confused with the declaration

float (*fx)();
...
fc=(*fx)(x);

and any ideas on a fix ? i can also generate internal compiler error
op=69, but it looks like the same problem in a different quise.

i'd be most grateful for any help you can give me on this. i am snailing
a copy of this to mark williams co. but am hoping that i might get a
quicker response over the net (and that MW are listening).

ben whitaker



-- 
-------------------------------------------------------------------------
school of molecular sciences  #  EARN    kafe3@cluster.sussex.ac.uk
university of sussex          #  UUCP    mcvax!ukc!icdoc!syma!benw
brighton bn1 9qj (uk)         #  phone   (44) 273 606755 x3221