Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!pasteur!ames!elroy!peregrine!ccicpg!cci632!sjfc!kes3200
From: kes3200@sjfc.UUCP (Ken Staggers)
Newsgroups: comp.sys.att
Subject: unixpc tape backup problem
Keywords: tape backup unixpc
Message-ID: <504@sjfc.UUCP>
Date: 8 Apr 89 22:02:07 GMT
Distribution: usa
Organization: St. John Fisher College, Rochester, NY
Lines: 28

HELP!!!!

Could someone help me with this problem?
We have a unixpc and a tape backup drive.  When I was running the att "Tape
Backup Diagnostics" disk, it always gets stuck at the part:
"Checking DMA address operation...."

Yet when I run the regular diagnostics disk, processor and memory check
works perfectly.  NO errors, and it doesnt get stuck.

Any ideas on what could be wrong?

------------------------------------------------------------------------
Also, what is the key in hooking up another terminal to the unixpc?
We have 6 terminals and an expansion box with a 3 combo boards, which the
system recognizes. 
  1- What should the setup be for the other terminal
  2- How do we get it to act like a terminal (i.e. where in install do
     we go?  We have told it that RS232 port 1-6 are in TERMINAL mode, 
     9600 baud, but it doesnt work)?

There is no response.  We have hooked it up with a null modem cable and we
are in multiuser mode.

HELP!!!!!

--Ken Staggers
(...!rutgers!rochester!cci632!sjfc!kes3200)