Xref: utzoo comp.sys.ibm.pc:26988 comp.unix.xenix:5548
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!tektronix!percival!fryepro!mikel
From: mikel@fryepro.UUCP (Michael Lang)
Newsgroups: comp.sys.ibm.pc,comp.unix.xenix
Subject: modem and accelerator card info needed.
Keywords: modem/accel info.
Message-ID: <189@fryepro.UUCP>
Date: 3 Apr 89 14:53:01 GMT
Reply-To: mikel@fryepro.UUCP (Michael Lang)
Distribution: usa
Organization: Frye Electronics, Inc.  Tigard, Oregon
Lines: 22

I recently purchased a used 1200 baud internal 1/2 card modem, at a 
computer swap meet. It works very reliably, but there was no documentation
with it. Could someone tell me some basic info about it, such as what
the 6 DIP switches on the back of it configure. Also any useful features
that this modem has to offer.

Here is the make and model as printed on the card:

		OMNITEL  T1200  -PC2 REV B


My next question is about pc accelerator cards. I know that its possible
to plug a 386 accelerator into a 286 system and run a 386 OS such as
Xenix on it. Is it possible to plug a 286 (or 386) accelerator card into
an 8088 system and run a 286 version of Xenix. I have never heard of it
being done, but out of curiosity had to ask.

Thanks in advance for the information.


Michael Lang  --  ...tektronix!percival!fryepro!mikel
		  ...tektronix!percival!mikel