Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ukma!xanth!nic.MR.NET!hal!ncoast!allbery From: allbery@ncoast.ORG (Brandon S. Allbery) Newsgroups: comp.sys.ibm.pc Subject: Re: Procomm in vt-100 mode Message-ID: <13561@ncoast.ORG> Date: 12 Apr 89 02:36:35 GMT References: <2672@garth.UUCP> <22669@agate.BERKELEY.EDU> Reply-To: allbery@ncoast.UUCP (Brandon S. Allbery) Followup-To: comp.sys.ibm.pc Organization: Cleveland Public Access UN*X, Cleveland, Oh Lines: 24 As quoted from <22669@agate.BERKELEY.EDU> by wainscot@jell-o.berkeley.edu (Brian Wainscott): +--------------- | In article <2672@garth.UUCP> dbarnes@garth.UUCP (Dave Barnes) writes: | >emacs, read news, etc., but when I attempt a binary file transfer | >from my UNIX account to my AT, my AT freezes up and I have to reset. | | whatsoever to do with the terminal mode (I think). I log on in vt100 | mode and do file transfers (xmodem, modem7) all the time AT 1200 BAUD!! | When I try 2400 baud, it hangs every time, even when doing ASCII uploads! +--------------- Hmm. Back when I used Procomm 2.4.2, I used it at 2400 baud all the time, with no problems... although I used Ymodem Batch or Kermit instead of Xmodem. You should be aware that Procomm 2.4.3 appears to exist. (I use Telix now... but may switch, depending on whether it works in a Windows-286 window or not.) ++Brandon -- Brandon S. Allbery, moderator of comp.sources.misc allbery@ncoast.org uunet!hal.cwru.edu!ncoast!allbery ncoast!allbery@hal.cwru.edu Send comp.sources.misc submissions to comp-sources-misc@ NCoast Public Access UN*X - (216) 781-6201, 300/1200/2400 baud, login: makeuser