Xref: utzoo comp.sys.mac:29591 comp.sys.mac.programmer:5383
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ukma!uflorida!haven!mimsy!brillig.umd.edu!pjn
From: pjn@brillig.umd.edu (P. J. Narayanan)
Newsgroups: comp.sys.mac,comp.sys.mac.programmer
Subject: Problems in screen dump
Message-ID: <16750@mimsy.UUCP>
Date: 5 Apr 89 15:24:54 GMT
Sender: nobody@mimsy.UUCP
Reply-To: pjn@brillig.umd.edu.UUCP (P. J. Narayanan)
Distribution: usa
Organization: University of Maryland, Dept. of Computer Sci.
Lines: 29


	I was having trouble with printing the screen on Mac II. I was
trying to print a window onto which some graphic drawing was done. The
window gets printed onto the printer, but a considerable portion at
the right side gets clipped. 

	Is there an incompatibility of screen print that is there on this
Mac OS with Mac II screen size or co-ordinates? Does Mac II have more pixels
than what the print program thinks it has (which could be right for Mac + 
or SE), that part of the window is being clipped?

	I would appreciate it if someone can give me a solutions to the
problem, either on the net or by e-mail.

	Thanks.

		P J Narayanan
_________________________________________________________
Addresses:

ARPA: pjn@brillig.umd.edu      UUNET:  ...!uunet!brillig!pjn

USPS:
	P J Narayanan
	Centre for Automation Research
	University of Maryland
	College Park  MD20742
	U. S. A.
_________________________________________________________