Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!elroy!orion.cf.uci.edu!uci-ics!zardoz!dhw68k!arcturus!felix!kehr
From: kehr@felix.UUCP (Shirley Kehr)
Newsgroups: comp.sys.mac
Subject: Re: MS Word printing question
Message-ID: <90726@felix.UUCP>
Date: 6 Apr 89 15:15:02 GMT
References: <141200010@cdp> <11207@well.UUCP> <21593@etlcom.etl.JUNET>
Sender: daemon@felix.UUCP
Reply-To: kehr@felix.UUCP (Shirley Kehr)
Organization: FileNet Corp., Costa Mesa, CA
Lines: 52

In article <21593@etlcom.etl.JUNET> michel@etlcom.etl.JUNET (Michel Pasquier) writes:
 
< I have used MS Word for a long time and very seldom found things
<that I would do and Word could'nt. But this time...
<
< The problem is: I need double-sided printing with real laser quality.
<
< So I want the texts to be printed (on an Apple LaserWriter) *directly*
<on both sides. What I mean is I don't want to print a first single-sided
<version and then have it double-sided with a %$#%$ photocopier. 
< Since I can't do it hard (and modify the printer), let it be soft. The
<best way I could figure is to print first all the odd pages, feed the
<LaserWriter with them bottom up and then print the even pages in reverse
<order. That would be a great idea if I only had the slightest idea on how
<to do this...
 
< So, is there a trick (or even a regular method :-) to achieve this?
<Or maybe another solution? Any idea or suggestion would be *greatly*
<appreciated. Thanks.

You're not going to like the answer (one page at a time) but if you're
really motivated it works. I've even done things in landscape changing
the gutter width to chop off the inside half of the page. Using this
method, you put the paper through the printer FOUR times. That took some
motivation!

Since FullWrite gives us the option of printing only odd or only even
pages, I'm really hoping that Microsoft felt some pressure to add this
to Version 4.0, but since I haven't seen this listed as a new feature
anyplace, I'm not holding my breath.

Please, Microsoft, we need this simple capability. It's a lot more practical 
than printing pages in reverse order. If you really want
to do something fancy, let us print a real 2-up (not reduced please). Using
landscape (Wide) mode you could print both pages on the same sheet of paper
and save half your paper costs on review copies.

For those who use landscape mode, I learned a neat trick you can use to
get two-sided copies backed up correctly.

First set the gutter margin to at least half the page width (5.5 + any real
gutter you want for binding, I use 5.75). This prints odd pages on the
right side of the 8.5 x 11-inch page and even pages on the left side.

When you go to a copier that automatically copies from one-sided to two-sided,
turn the even pages upside down. (In essence, you are putting all the text
at the top (or bottom) of the page if you hold it in portrait direction.)

Now you only have one cut to make and all of the pages are backed up
correctly.

Shirley Kehr