Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!bsu-cs!mithomas From: mithomas@bsu-cs.bsu.edu (Michael Thomas Niehaus) Newsgroups: comp.sys.mac Subject: Re: Confused about SIMMs Message-ID: <6760@bsu-cs.bsu.edu> Date: 13 Apr 89 23:00:41 GMT References: <195@xochitl.UUCP> <72@nisca.ircc.ohio-state.edu> Distribution: na Organization: CS Dept, Ball St U, Muncie, IN, USA Lines: 20 In article <72@nisca.ircc.ohio-state.edu>, bobd@hpuxa.ircc.ohio-state.edu (Bob DeBula) writes: > As a general rule, you can use faster SIMMs (or chips) than are required by > the machine, you cannot use slower (i.e. 150ns in place of 120ns)... However, the SE for the most part comes with SIMMs that ARE faster than required. A standard SE needs 150ns SIMMs, but normally comes with 120ns SIMMs (some early SEs did come with 150ns SIMMs), apparently because of quantity discounts on the 120ns SIMMs (the same ones as used in a Mac II, IIx, and IIcx). To avoid confusion, I would say to only get SIMMs that are 120ns or faster. The slower ones may work now, but if you ever upgrade in the future... -Michael -- Michael Niehaus UUCP: !{iuvax,pur-ee}!bsu-cs!mithomas Apple Student Rep ARPA: mithomas@bsu-cs.bsu.edu Ball State University AppleLink: ST0374 (from UUCP: st0374@applelink.apple.com)