Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ncar!husc6!rice!sun-spots-request
From: moldev!rootksh@uunet.uu.net (Operator)
Newsgroups: comp.sys.sun
Subject: Problem: Slow UUCP using Trailblazer+
Keywords: Hardware
Message-ID: <302@moldev.UUCP>
Date: 5 Apr 89 04:50:28 GMT
Sender: usenet@rice.edu
Organization: Molecular Devices Corp., Menlo Park, CA.
Lines: 20
Approved: Sun-Spots@rice.edu
Original-Date: 24 Mar 89 18:06:55 GMT
X-Sun-Spots-Digest: Volume 7, Issue 226, message 12 of 12

Hi folks -

I'm trying to find out why my modem connects to uunet in high speed mode,
but the transmission speed is only about 1200 baud. I know that the two
modems are happy and that the phone lines are of good quality because if I
interrupt a call ( using +++ ) to examine the registers S70 and S72, they
show rates of 16000-17000 bps. I do the setup and dialing for the modem in
the chat script like this :

uunet Any cua0 19200 cua0 "" ATZ\r OK atx3v1e0q0s7=60s50=255dtXXXXXXXXXXX\r FAST
 "" ogin: XXXXX assword: XXXXX

When uucp is receiving a file, The RCV light on the front panel of the
modem shows only brief pulses - I'd guess no more than 20% of the time on,
80% off.

Also ...  Can you tell me if it is possible or desireable to enable "g"
protocol in the Trailblazer with the uucp in SunOS4.0 ?  UUCP appears to
hang when it's enabled.  If not, then will it be possible under 4.1 (
Honey DanBer uucp ?? ).