Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!lll-winken!uunet!mcvax!cernvax!acadch!impch!patg
From: patg@impch.UUCP (Patrick Guelat)
Newsgroups: comp.unix.xenix
Subject: 2nd hd-controller
Message-ID: <886@impch.UUCP>
Date: 9 Apr 89 19:53:08 GMT
Distribution: comp
Organization: ImproWare ComputerSystems Switzerland
Lines: 23

Hi there,

We're using SCO 2.3.1 with an ESDI-controller. We're suffering under
a serious problem: as soon we get a bigger disk, we fill it up and
need more diskspace... This takes no end, and that's a REAL problem. ;-)

We're now a the point where we need to install a second controller
to fulfill our needs ;-)). We have another two 70 MB hd's lying
around here with ST506 interface waiting to be filled up ;-)

SCO 2.3.1 now supports a second controller (as mentioned in the release notes).
Is there anyone out there using a second hd-controller under SCO2.3.1
who can give us some hints regarding the type of controller,
IO-base address, irq-vector ( 15 ? ) and so on ?

        Pat
--
\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//
// Patrick Guelat, ImproWare Switzerland    \    SMART: patg@impch.uucp   \\
\\ SUB-NET: ..!altger!impch!{patg,boxdiger}  \________ Wasting time is an //
// EUNET  : ..!cernvax!impch!{patg,boxdiger}          \  important time of\\
\\ OTHER  : ..!uunet!acad!acadch!impch!{patg,boxdiger} \   living.        //
//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\