Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!steinmetz!davidsen
From: davidsen@steinmetz.ge.com (Wm. E. Davidsen Jr)
Newsgroups: comp.unix.xenix
Subject: Re: Serial I/O Drivers for SCO
Message-ID: <13582@steinmetz.ge.com>
Date: 11 Apr 89 20:37:29 GMT
References: <991@lgnp1.LS.COM>
Reply-To: davidsen@crdos1.UUCP (bill davidsen)
Organization: General Electric CRD, Schenectady, NY
Lines: 20

In article <991@lgnp1.LS.COM> phile@lgnp1.LS.COM (Phil Eschallier) writes:
| 
| i am using a 12mhz 80286 for a lot of mail and news transfer.  the problem
| is this ... at any baud rate, the thru-put of outbound data is always much
| high than the thru-put for inbound data -- this is at any baud rate from
| 1200 thru telebit PEP (19200 or 9600).

  Three things you should do:

1) if you don't have the uucp upgrade call support and ask for it. You
   don't need it if you have HDB.

2) follow the notes and set your "windows" to seven instead of three.

3) some patches were posted within the last month or so to do this, you
   may still have them online.
-- 
	bill davidsen		(wedu@crd.GE.COM)
  {uunet | philabs}!steinmetz!crdos1!davidsen
"Stupidity, like virtue, is its own reward" -me