Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!rochester!udel!mmdf
From: packman%TAMUNIX.BITNET@tamvm1.tamu.edu (Packman)
Newsgroups: comp.os.minix
Subject: Re:  Minix 1.3 Works!!!!!
Message-ID: <14125@louie.udel.EDU>
Date: 27 Apr 89 16:44:52 GMT
Sender: mmdf@udel.EDU
Lines: 12

>The Everex Step 386/20 runs at 20 MHz, has a WDC controller, with an 80 Meg
>hard disk.  The second partition is an "Extended Partition" with no logical
>drives mounted inside it.  The partition runs from cyl 218 to 417, and has
>the /usr on it.  I still load the rfs from floppy, and truly love the speed.

By running Dos fdisk to making my first partition and second
partitions, and then going back with Minix fdisk, I was able to create
partitions three and four for rfs and /usr on a 90 Meg hard disk.

>I am having slight problems getting my /etc/ttys to work properly.  Under DOS
>I have the modem on com1, and it's maxbaud is 2400.  I tried the following
>in my ttys, and got multiple logins on the console until I did the std. ctrl-f9