Path: utzoo!dptcdc!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!blake!joseph
From: joseph@blake.acs.washington.edu (Joseph Chan)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: NCSA telnet2.2d with packet driver slip
Message-ID: <1613@blake.acs.washington.edu>
Date: 17 Apr 89 21:46:26 GMT
Reply-To: joseph@blake.UUCP (Joseph Chan)
Distribution: na
Organization: University of Washington, Seattle
Lines: 30
Keywords:Telnet, PCIP, packet driver, SLIP

I have down-loaded the NCSA telnet2.2d and packet driver slip8250
from sun.soe.clarkson.edu.   I can not make it to work.
Any help will be much appreciated.

The hardwares are: Zenith data system 286 machine running MS-DOS 3.30
with Hayes Smart Modem 1200.

To load the packet driver,  I used:
    slip8250 0x60 slip 2 0x2f8 1200
where I used com2 for modem.

To configure telnet for slip,  I editted config.tel files with
the following parameters:
      hardware=packet
      interrupt=2
      address=6
      ioaddr=0x60

Here are the error message from telnet program:
   packet driver return error on driver_info call
   could not initialize hardware level network driver
   error initializing network or getting configuration file.

Thank you in advance for any help you may have.

Please send reply to:
  USENET:  uw-beaver!uw-nsr!joseph
  Internet: joseph@nsr.bioeng.washington.edu
            joseph@blakke.acs.washington.edu