Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!lll-winken!xanth!cs.odu.edu!scott
From: scott@amon-re.cs.odu.edu (Scott Yelich)
Newsgroups: comp.sys.atari.8bit
Subject: Re: VT100 Emulation Software
Message-ID: <8490@xanth.cs.odu.edu>
Date: 15 Apr 89 16:38:29 GMT
References: <81441MXB126@PSUVM>
Sender: news@cs.odu.edu
Reply-To: scott@cs.odu.edu (Scott Yelich)
Organization: Old Dominion University, Norfolk, Va.
Lines: 20

In article <81441MXB126@PSUVM> MXB126@PSUVM.BITNET (Michael S. Barthelemy) writes:
>I am looking for software that emulates a VT100 terminal (Or anything which
>will enable me to connect up my 130XE with PSUVM)  I seem to have some 'Special
>Problems.'  I have a 130XE with two disk drives (XF551 and Indus GT) a SX212
>1200 baud modem a color RGB monitor and a ICD P:R: Connection.  I have heard
>about the Chemilion (I can't spell) software, but it will not work with my
>P:R: connection.  Thus I have been stuck with using the 850 Express! software
>which came with my modem.  This means that I have a 40 column screen and no
>cursor control (which I sorely need).  If anyone out there can help me please
>drop me a note!

This is strange.... the 'Chemilion' DIDN'T work with the P:R:?  I had a
home-brew Rverter and that program worked for me.  In fact, I got 850 express
to work and just about ANY 850 program with the one exception of the
vt100sq program.

Have you tried KERMIT?
If you haven't, I would recommend it highly.  If you have ftp access (in any
way... ie: friends...), KERMIT is available over the net...
   Scott D. Yelich                           scott@cs.odu.edu  [128.82.8.1]