Path: utzoo!dptcdc!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!mcvax!hp4nl!botter!klipper.cs.vu.nl!rcwlobe
From: rcwlobe@klipper.cs.vu.nl (Reg Lobee)
Newsgroups: comp.sys.cbm
Subject: RS232 problem
Message-ID: <2166@botter.cs.vu.nl>
Date: 18 Apr 89 09:33:28 GMT
Sender: news@cs.vu.nl
Reply-To: rcwlobe@cs.vu.nl ()
Lines: 17

I have a Lightspeed 1200 modem which I can't get to work when I use
it on 1200 baud with a normal program like vipterminal. (or any
other program) The problem seems to be the kernal RS232 routines.
I have changed the terminalprogram vipterminal so it uses a user
defined baudrate (anyone familiar with the RS232 routines?).
I have set the lo-byte to 40 and the hi-byte to 1. Now I can
use my modem with 1200 baud, but I have to change all of my
communication software to do so.
Does anyone know what the problem is?
What's the solution?

Thanks in advance.

|^^\   | Reg Lobee        |=====================================|
|__/   | rcwlobe@cs.vu.nl | To establish voice contact, don't   |
|\     | V.U. University  | shout at the keyboard. Use a phone! |
| \ eg | The Netherlands  |=====================================|