Xref: utzoo comp.sys.mac:30709 comp.sys.cbm:2576
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!pasteur!ames!lll-winken!uunet!mcvax!hp4nl!eutrc3!rcbamw
From: rcbamw@eutrc3.UUCP (m.waucomont)
Newsgroups: comp.sys.mac,comp.sys.cbm
Subject: Re: Printing from a Mac SE to a MPS1000 printer
Message-ID: <608@eutrc3.UUCP>
Date: 25 Apr 89 18:21:03 GMT
References: <8061@pucc.Princeton.EDU>
Reply-To: rcbamw@eutrc3.UUCP (m.waucomont)
Organization: Eindhoven University of Technology, The Netherlands
Lines: 15

In article <8061@pucc.Princeton.EDU> BSKENDIG@pucc.Princeton.EDU writes:

>Theoretically, this should work: I can hook the printer port of the Mac up to
>my RS232 interface on the Commodore, have the C128 translate the incoming
>ImageWriter control codes to Epson codes, and send *that* to the MPS1000.

Correct!

>I only get meaningful data when I tell the computers to communicate at 2400
>baud - the C128 can't handle anything faster, ......

And that's your problem. Transferrate is 9600 baud, using 1 startbit and
one stop bit....

M. 'Mikki' Waucomont