Path: utzoo!utgpu!watmath!isishq!f171.n221.z1.FIDONET.ORG!izot From: izot@f171.n221.z1.FIDONET.ORG (Geoffrey Welsh) Newsgroups: comp.sys.cbm Subject: Another Desterm Question Message-ID: <2184.245690DD@isishq.FIDONET.ORG> Date: 26 Apr 89 12:20:35 GMT Sender: ufgate@isishq.FIDONET.ORG (newsout1.25) Organization: FidoNet node 1:221/171 - Izot's Swamp, Kitchener ON Lines: 40 > From: djn1537@uxf.cso.uiuc.edu > Message-ID: <46400038@uxf.cso.uiuc.edu> > > At the top of the Desterm screen there is a Wrap: Off . Is there > and way to set this to on?? (I assume there would be else it wouldn't be > there). I looked in the docs but could not find any mention of it. That's a VT-100 setting (i.e. do I stop at the end of one line or do I continue to the next line?), and the VT-102 docs said "default = OFF". The setting is changed by the appropriate VT-100 escape sequence. > Also at the top of Desterm's screen is the LEDS: display. The docs > say "The four circles marked LED show the status of the LED settings in > vt100 mode." What exactly does each one of the O's mean because mine have > never changed and I use it in vt100 mode all the time? Then you've never used a program which makes use of the LEDs on a VT-100. If the host ever sends the code to light an LED, the corresponding "O" will be "shaded in". > Finally one last question (sigh), what is the author's E-mail > address? > The docs talk about the Punternet node 7 or Fidonet node 1:221/171 ? I > have > an idea but I am not sure how to phrase it correctly?? UUCP: {uunet!}watmath!isishq!178!Matthew.Desmond InterNet: Matthew.Desmond@f178.n221.z1.FIDONET.ORG PunterNet does not gate to any other net; the above addresses are for Matt's FidoNet site. Matt has just been connected to the Fido-gated version of this conference and should be caught-up & on-line in a day or two. -- Geoffrey Welsh - via FidoNet node 1:221/162 UUCP: ...!watmath!isishq!171!izot Internet: izot@f171.n221.z1.FIDONET.ORG