Xref: utzoo comp.sys.ibm.pc:27495 comp.sys.apple:12102
Path: utzoo!attcan!uunet!jma!max
From: max@jma.UUCP (Max Heffler @ Landmark Graphics)
Newsgroups: comp.sys.ibm.pc,comp.sys.apple
Subject: Re: Help!  Apple II to MS-DOS
Summary: Serial line transfer via Manx Aztec C
Message-ID: <139@jma.UUCP>
Date: 13 Apr 89 19:37:03 GMT
References: <91@aicchi.UUCP> <1336@naucse.UUCP>
Lines: 17

In article <1336@naucse.UUCP>, wew@naucse.UUCP (Bill Wilson) writes:
> From article <91@aicchi.UUCP>, by joeloda@aicchi.UUCP (Joe Loda):
> > 
> > Help!  A friend of mine just purchased an MS-DOS based pc, and is looking 
> > to convert (somehow) as much as possible from his Apple //e.  Is there
> > any sort of conversion tool or utility available to aid in this?
> >
> There is only one product that I know of that will allow you to read
I have used Manx Aztec C on both the IBM-PC and the Apple II and there
is a serial line transfer program that can be run to transfer any file
either direction; however, only ASCII files will be of any use.

-- 
Max Heffler                     uucp: ..!uunet!jma!max
Landmark Graphics Corp.         phone: (713) 579-4751
333 Cypress Run, Suite 100
Houston, Texas  77094