Path: utzoo!dptcdc!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!agate!garnet.berkeley.edu!markxx
From: markxx@garnet.berkeley.edu
Newsgroups: comp.sys.ibm.pc
Subject: Re: Procomm in vt-100 mode
Summary: Procomm *does* do binary transfers on COM3
Message-ID: <23245@agate.BERKELEY.EDU>
Date: 18 Apr 89 09:31:58 GMT
References: <2672@garth.UUCP> <2380@cps3xx.UUCP>
Sender: usenet@agate.BERKELEY.EDU
Organization: University of California, Berkeley
Lines: 17

In article <2380@cps3xx.UUCP> cook@frith.UUCP (Greg Cook) writes:
>In article <2672@garth.UUCP> dbarnes@garth.UUCP (Dave Barnes) writes:
>> 
(stuff deleted)
>
>I would check which com port you are using your modem on.  From what I
>understand, Procomm does not allow binary transfers when on com port 3.

	No- Procomm *does* allow binary transfers on COM3- I have
been doing just that for over a year with it, and no problems.

>Greg Cook
>cook@frith.egr.msu.edu
>gcook@horus.cem.msu.edu

Mark Ritchie
markxx@garnet.Berkeley.EDU