Path: utzoo!dptcdc!jarvis.csri.toronto.edu!mailrus!ames!xanth!nic.MR.NET!indri!polyslo!csun!csuna!abcscnge
From: abcscnge@csuna.csun.edu (Scott "The Pseudo-Hacker" Neugroschl)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Drive type 20 setting
Keywords: IBM AT harddrive
Message-ID: <1918@csuna.csun.edu>
Date: 19 Apr 89 04:31:37 GMT
References: <1898@umbc3.UMBC.EDU>
Reply-To: abcscnge@csuna.csun.edu (Scott Neugroschl)
Distribution: usa
Organization: CSU Northridge
Lines: 20

In article <1898@umbc3.UMBC.EDU> battle@umbc3.UMBC.EDU (Rick) writes:
}I have an IBM AT with a new Seagate ST-4038 hard drive. The
}controller is a 16 bit Western Digital.
} 
}According to the documentation I have the ST-4038 is a drive
}type 20.  My IBM Advanced Diagnostic setup disk only allows
}drive types to range from 1 to 15.  How do I set the drive
}type to 20?
} 

Go to your dealer IMMEDIATELY and ask for the diagnostics 2.xx (mine came
with my IBM  EGA card).  This provides setup for many more disks (I also have
a type 20 disk).


-- 
Scott "The Pseudo-Hacker" Neugroschl
UUCP:  ...!sm.unisys.com!csun!csuna.csun.edu!abcscnge
-- unless explicitly stated above, this article not for use by rec.humor.funny
-- Disclaimers?  We don't need no stinking disclaimers!!!