Path: utzoo!dptcdc!jarvis.csri.toronto.edu!mailrus!ncar!tank!eecae!dsacng1!dlscg1!drms3002 From: drms3002@dlscg1.UUCP (Andy Meijers) Newsgroups: comp.sys.ibm.pc Subject: Re: Help with serial interface Summary: Kaypro serial map Message-ID: <461@dlscg1.UUCP> Date: 18 Apr 89 13:59:35 GMT References: <314@scr1.UUCP> Organization: Defense Logistics Service Center, Battlecreek, Mich Lines: 24 In article <314@scr1.UUCP>, pechter@scr1.UUCP writes: > Anyone have the pinouts for an old Kaypro 8088 PC with a 9 pin async > port? Per my very overpriced Kaypro tech manual, the maps are as follows for the suitcase style luggable:(unknown if first desktop was the same) DT9P style (male?) signal DT9S style (female?) 1 carrier detect 7 2 receive data 4 3 transmit data 2 4 data term.ready 6 5 signal ground 5 6 data set ready 1 7 req. to send 8 8 clear to send 3 9 ring indicator 9 Hope this helps, etc. -- Andy Meijers DRMS-LZA Phone:(616)961-7253 Defense Reutilization & Marketing Service FTS:552-7253 AV:932-7253 Battle Creek, MI 49017-3092 Internet:ameijers%dlscg1.uucp@daitc.arpa UUCP: {uunet!gould!dsacg1,osu-cis!dsacg1,eecae!dsacng1}!dlscg1!ameijers