Xref: utzoo comp.sys.ibm.pc:27873 comp.sys.ibm.pc.rt:466 Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!bloom-beacon!mit-eddie!rutgers!aramis.rutgers.edu!topaz.rutgers.edu!thorogood.rutgers.edu!pmoore From: pmoore@thorogood.rutgers.edu (Peter Moore) Newsgroups: comp.sys.ibm.pc,comp.sys.ibm.pc.rt Subject: HELP! 2 40meg HDDs Keywords: help,harddrive,plus,386,config Message-ID: Date: 25 Apr 89 14:25:04 GMT Organization: Rutgers Univ., New Brunswick, N.J. Lines: 43 HELP! I have a 386pc with the following configuration and am having diffulty with my hard drives. 1 40meg Seagate internal drive (ST-251-1) 1 40meg Plus HardCard (internal on a card) The problem is this: The LOGICAL DRIVES are screwed up. I have each drive partitioned as two 21.3 (or whatever) volumes. So I would have liked the Seagate to be C; and D: and the plus hardcard to be E: and F: Instead the following is happening::: The Seagate has been set by dos as logical C: and F: The Plus HardCard has been set as logical D: and E: (ALSO, E: is also accessible as logical G:!!!!!!) What the Heck. When I do a norton SI command, I am told I have 7 logical drives A-G which should be 6 logical drives A-F:: C: SEAGATE1 D: PLUS1 E: PLUS2 F: SEAGATE2 G: PLUS2 Go and figure the above ^^^^ PLEASE IF ANYONE CAN OFFER SOME HELP IN GETTING THIS CONFIGURED THE WAY I WANT, PLEASE LET ME KNOW! Thank you. -- ------------------------------------------------------------------------------- Peter Moore Rutgers University 294 Michael J Smith Court New Brunswick, NJ Somerset, NJ 08873 (201) 846-1035 pmoore@thorogood.rutgers.edu -------------------------------------------------------------------------------