Path: utzoo!attcan!uunet!tank!ncar!ames!ig!bionet!agate!saturn!ucscb.UCSC.EDU!alibaba
From: alibaba@ucscb.UCSC.EDU (Alexander M. Rosenberg)
Newsgroups: comp.sys.mac.hypercard
Subject: Re: Dialing
Message-ID: <6909@saturn.ucsc.edu>
Date: 19 Apr 89 03:00:05 GMT
References: <9981@netnews.upenn.edu> <29130@apple.Apple.COM>
Sender: usenet@saturn.ucsc.edu
Reply-To: alibaba@ucscb.UCSC.EDU (Alexander M. Rosenberg)
Distribution: comp
Organization: Univ. of California at Santa Cruz Hacker's Anonymous
Lines: 25

Need I mention the fact that the "dial" command
only works at 1200 baud (maybe it was 300) and
some modems won't work too well with this.

A good example is to set a Trailblazer Plus
to not autobaud (ats51=2 will set it for 2400)
and the "dial" command will not work at all.

How about:

dial 123-4567 with "ATS51=2" at 2400

or so. Another problem is that when a 
Trailblazer is set to autobaud, it
requires about 3 "a" characters to come
from the computer before it will realize the
serial port baud rate.


-------------------------------------------------------------------------------
-  Alexander M. Rosenberg  - INTERNET: alibaba@ucscb.ucsc.edu   - Yoyodyne    -
-  Crown College, UCSC     - UUCP:...!ucbvax!ucscc!ucscb!alibaba- Propulsion  -
-  Santa Cruz, CA 95064    - BITNET:alibaba%ucscb@ucscc.BITNET  - Systems     -
-  (408) 426-8869          - Disclaimer: Nobody is my employer  - :-)         -
-                          - so nobody cares what I say.        -             -