Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!WINDOM.UCAR.EDU!morris
From: morris@WINDOM.UCAR.EDU (Don Morris)
Newsgroups: comp.sys.proteon
Subject: p4200 configuration question
Message-ID: <8904212059.AA09171@WINDOM.UCAR.EDU>
Date: 21 Apr 89 20:59:56 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 18

Suppose I want to put a Proten box between, amoung other things,
two subnets on the same net (the subnet is defined by the 3rd byte):

		     128.1.1
			 |
		       Proteon
			 |
	 --------------------------------  128.1.2
	   |          |          |
	bridge      bridge    bridge
	   |          |          |
       128.1.3     128.1.4    128.1.5

Is it possible to configure the Proteon to route traffic to subnets
3, 4, and 5 out the 128.1.2 interface?
Thanks for any help on this.

-- Don --