Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: SDF100S@oduvm.cc.odu.edu (Sheila)
Newsgroups: comp.sys.sun
Subject: Sun386i questions
Keywords: 386i
Message-ID: <8903282124.AA12827@rice.edu>
Date: 21 Apr 89 04:13:07 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 14
Approved: Sun-Spots@rice.edu
Original-Date: Tue, 28 Mar 89 16:09:06 EST
X-Sun-Spots-Digest: Volume 7, Issue 232, message 18 of 21

I have a network of Sun386i's running 4.0 and 4.0.1.  I have a Hewlett-
Packard DraftPro Plotter I want to connect to my Sun386i. I'm having a
hard time finding information on what type of cable to use and how to set
up the printcap entry for it.

I used this following cable configuration for setting up the Sun386i and
Apple LaserWriter.

         A null-modem cable with line 7 wired straight through and lines 2 and
         3 swapped.

Would this be the same for the DraftPro Plotter? If anyone could send me
in the right direction to gather this information, I would greatly
appreciate it!!