Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: mcvax!iesd!tolboel@uunet.uu.net (Morten Tolboel)
Newsgroups: comp.sys.sun
Subject: BUGs in parameter-transfers (printer-filter) ?
Keywords: Software
Message-ID: <1601@iesd.dk>
Date: 25 Apr 89 08:49:41 GMT
Sender: usenet@rice.edu
Organization: Dept. of Comp. Sci., Aalborg University, Denmark
Lines: 27
Approved: Sun-Spots@rice.edu
Original-Date: 30 Mar 89 21:54:35 GMT
X-Sun-Spots-Digest: Volume 7, Issue 245, message 11 of 15

Bug in sun4os with lpr?? (Bad parameter transfer)

We have discovered a problem in OS ver. 4.0 and 4.0.1 concerning the
transfer of parameters to the printer-filter.

When we transfered our printer-filter (called 'if' in /etc/printcap) from
3.5 to 4.0 or even 4.0.1, the filter didn't work because the transfered
width-parameter (width of paper (chars)) is allways 0 (zero) even when lpr
is called with option '-w80'. The problem also occures when 'of'(output
filter) is used.

The length-parameter and all other parameters (hostname, acct.file etc.)
are transfered ok. The width-parameter, though, gives us grey hair......

(* Why didn't god teach the peoples of the world to speak DANISH?
   My English spelling stinks......                              *)


Kind regards                        
Morten Tolboel                      
Institute of electronic systems     
University of Aalborg               
Denmark (not a suburb of Sweden!)   
                                    
Mail: tolboel@iesd.dk               
  or  tolboel@iesd.uucp             
  or  {...}!mcvax!dkuug!iesd!tolboel