Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: gaudiano@bucasb.bu.edu
Newsgroups: comp.sys.sun
Subject: Tektronix -> HP LaserJet II filter?
Keywords: Software
Message-ID: <8904031845.AA21270@thalamus.bu.edu>
Date: 25 Apr 89 09:50:14 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 18
Approved: Sun-Spots@rice.edu
Original-Date: Mon, 3 Apr 89 14:45:14 EDT
X-Sun-Spots-Digest: Volume 7, Issue 245, message 14 of 15

I am looking for a filter that will rasterize standard tektronix (T10 or
T14) ouput for printing with a LaserJet II. I am on a Sun386i with 4.0.1,
and I have various filters working on it, including one that can copy the
contents of a tektool window to the LaserJet, but it uses the tektool
pixrect and thus can only be used on the console. If anyone is aware of a
filter that will take standard tektronix into LaserJet raster commands,
I'd love to know.  This does not necessarily have to be P/D stuff, even
the name of a company that markets this type of filter would be
appreciated.  Thank you very much.

     Paolo Gaudiano
     Boston University
     Center for Adaptive Systems
     111 Cummington street
     Boston, MA 02215

     (617) 353-6181
     gaudiano@bucasb.bu.edu