Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: rob@xermes (Robert A. Schroeder)
Newsgroups: comp.sys.sun
Subject: Non-Sun SCSI disk drives on a Sun 4/110?
Keywords: Hardware
Message-ID: <258@xermes.UUCP>
Date: 26 Apr 89 02:56:20 GMT
Sender: usenet@rice.edu
Organization: XEROX - MESL, No. Tarrytown, NY
Lines: 27
Approved: Sun-Spots@rice.edu
Original-Date: 10 Apr 89 13:41:07 GMT
X-Sun-Spots-Digest: Volume 7, Issue 250, message 8 of 13

I was planning on adding a Maxtor 760 MB SCSI disk to my 4/110.  However,
I happened upon some information in the "Hardware READ ME FIRST for the
Sun 4/110 Systems" that floored me.  It says: 

	The Small Computer Systems Interface (SCSI) connector on the Sun
	4100 CPU board installed in your 4/110 system may not adhere
	completely to the SCSI specification.  Pin 26 on the SCSI connector
	may be grounded.  Do NOT use non-Sun SCSI disk drives with any Sun
	4/110 or any 4100 CPU based system.  Use of a SCSI drive not
	purchased from Sun may result in the damage or destruction of the
	disk drive/s.

Is this for real??  I've given my salesman over a week to try to
confirm/deny this statement and have yet to hear from him.  So, I thought
I'd turn to netland for some help on this one.   Please tell me it's a
joke (I've actually already ordered the disk :( ).

Rob Schroeder			...philabs!xermes!rob
Xerox
WRC-MESL
No. Tarrytown, NY
(914) 631-4710
-- 
Robert Schroeder			|  VOICE - (914) 631-4710
Xerox - Mechanical Engineering		|  	   8* 348-1237
	Research Lab			|  UUCP -  philabs!xermex!rob
No. Tarrytown, NY  10591		|  XNS	-  Rob:WRC-MESL:Xerox