Path: utzoo!dptcdc!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!pyrnj!hhb!leonh
From: leonh@hhb.UUCP (leon howorth)
Newsgroups: comp.unix.ultrix
Subject: Ultrix 2.2 Unsupported Software Subsets
Keywords: Ultrix
Message-ID: <196@hhb.UUCP>
Date: 17 Apr 89 12:24:25 GMT
Organization: HHB Systems, Mawah, NJ
Lines: 24

I am trying to determine if anyone possessing a set of Ultrix 2.2
Distribution tapes (1600 bpi magtape to be exact) has been able to extract
the Franz Lisp Development Package from the Unsupported Software tape.

I have had my Ultrix 2.2 magtapes for almost a year now, but just recently
had a request to extract the Lisp Programs from the second tape in the set, 
which is the Unsupported software tape. The part number of the tape is 
BB-JU93B-BE and it is labeled "ULTRIX-32 V2.2 UNSUPP MT9". I have extracted 
other subsets from this tape (such as news) but when I use the "setld" command 
for this subset the beginning portion of the tape is read by "setld" after 
which I receive the message "Unknown Subset". I am using the setld command in
exactly the same manner as illustrated in section 8 of the Ultrix-32 v2.2
Programmers Manual, page 8-193. This is:

setld /mnt -a /dev/rmt0h ulxlisp022

(Note: I want to use /mnt as a temporary area for the programs). 

I have tried variations of the setld command without success. My DEC
Distributor is not making too much progress in resolving this - so far DEC
has sent me two more of the exact same tape with the same results. 
The Ultrix 2.2 Advanced Installation Guide (page B-15) lists the subset 
ULXLISP022 as one that is supposed to be on the tape. I would appreciate
any assistance on this. Thanks.