Xref: utzoo news.groups:9192 comp.lsi.cad:146 sci.electronics:5975
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wasatch!cs.utexas.edu!uunet!ncrlnk!ncr-sd!hp-sdd!hinojosa
From: hinojosa@hp-sdd.hp.com (Daniel Hinojosa)
Newsgroups: news.groups,comp.lsi.cad,sci.electronics
Subject: Re: CAD/CAM/CAE newsgroup proposal
Keywords: CAD
Message-ID: <1943@hp-sdd.hp.com>
Date: 25 Apr 89 21:06:39 GMT
References: <10542@rama.UUCP>
Reply-To: hinojosa@hp-sdd.hp.com.UUCP (Daniel Hinojosa)
Organization: HP, San Diego Division
Lines: 31

In article <10542@rama.UUCP> news@rama.UUCP (Usenet News Admin) writes:
>There seems to be no newsgroups devoted to (or even oriented
>towards electronic design automation issues like printed circuit
>board design, schematic capture,[...] 

>Here's some suggestions to get the ball rolling:
>comp.cad or comp.cadcam - General discussion concerning CAD/CAM/CAE
>comp.cad.pcb - Printed Circuit Board design
>comp.cad.hybrid - Hybrid circuit design

>James D. Cronin                   UUCP:   jdc@sc.harris.com  or

James, 
	I agree. I would like to see all of the above groups created.
I am a P.C. Designer/System administrator here and would like to get 
an overview of what the outside world is up to. Get the ball going and 
please be sure to keep the header of the subject accurate or similar 
to CAD/CAM. 






	Regards,

-- 
==dan=hinojosa==================================================================
           email -  uunet!ucsd!hp-sdd!hinojosa \ / uunet!hplabs!hp-sdd!hinojosa
---------------------------------------  ---==(*o*)==---  ----------------------
     Jesus saves... but Gretzky gets the rebound! He shoots. HE SCOOORES!!!