Xref: utzoo comp.protocols.tcp-ip:6959 comp.dcom.lans:2746
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ukma!xanth!mcnc!ecsvax!khj
From: khj@ecsvax.UUCP (Kenneth H. Jacker)
Newsgroups: comp.protocols.tcp-ip,comp.dcom.lans
Subject: Mac NCSA Telnet & 3B2/WIN Problem
Keywords: telnet macintosh 3B2 WIN NCSA
Message-ID: <6907@ecsvax.UUCP>
Date: 1 May 89 15:59:23 GMT
Followup-To: poster
Distribution: na
Organization: Appalachian State Univ
Lines: 27

** Hardware **
Mac II;  2MB;			| 3B2/500
Kinetics EtherPort II		|

** Software **
System 6.0.2			| System V
NCSA Telnet v2.2		| WIN/TCP v2.1

** Problem **
NCSA telnet's connect request to the 3B2 is "timing out",
eventually producing a "host or gateway not responding" error
message.


Our 3B2s are able to "telnet" and "ftp" among themselves.  We've
checked that the (thin) cables *are* connected/terminated
properly. Prior to the Mac's error dialog, packets (ARP?) are
being transmitted.


Please write to me if you have any ideas ...  Thanks!

-- 
Kenneth H. Jacker               Domain:   khj@uncecs.edu
Dept of Math Sciences           BITNET:   khj@ecsvax
Appalachian State Univ          UUCP:     ...!ecsvax!khj
Boone, NC  28608