Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ukma!rutgers!apple!oliveb!amiga!boing!dale
From: dale@boing.UUCP (Dale Luck)
Newsgroups: comp.sys.amiga
Subject: Re: X11 for Amiga, Announcement Warning
Message-ID: <740@boing.UUCP>
Date: 7 May 89 18:33:32 GMT
References: <722@boing.UUCP> <491@pai.UUCP> <727@boing.UUCP> <68928@pyramid.pyramid.com> <10663@megaron.arizona.edu>
Reply-To: dale@boing.UUCP (Dale Luck)
Distribution: na
Organization: Boing, Milpitas, Ca.
Lines: 14

In article <10663@megaron.arizona.edu> bakken@arizona.edu (Dave Bakken) writes:
>In article <68928@pyramid.pyramid.com>, eric@pyramid.pyramid.com (Eric Bergan) writes:
>> 
>> 	Are there any plans for SLIP support?
>

We've done some testing with an early version of DECnet for the Amiga
over serial line. It worked over standard serial line as well as over
ASDG's serial boards up to about 56k baud I think. There were some bugs
in the X11 support though so we removed the support for the release
and it will reappear in a later release when it is completely working.
-- 
Dale Luck     GfxBase/Boing, Inc.
{uunet!cbmvax|pyramid}!amiga!boing!dale